Fire alarm manual pull station mounting height

 · Right fire alarm protection device mounting heights nbg 12lsp pulsador manual manualzz 85 1 protec egypt Ada Requirements .  · If the path to the ADA-compliant fire extinguisher or pull station is unobstructed, the operable part must be placed from 15 inches to 48 inches off of the finished floor or ground. But when the wheelchair user must reach over an obstruction, these heights may change.  · Most fire alarm bells should be mounted at heights that place their tops above the floor at a height of at least 90 inches, or 7 1/2 feet, leaving at least 6 inches between the ceiling and the bell. Exceptions to standard fire alarm bell mounting heights must account for audibility in fire alarm systems.

Right fire alarm protection device mounting heights nbg 12lsp pulsador manual manualzz 85 1 protec egypt Ada Requirements For Fire Extinguishers Alarm Pull StationsAda . Manual Fire Alarm Boxes (Pull Stations) – The height of the manual fire alarm boxes shall be a minimum of 42 inches and a maximum of 54 inches measured vertically, from the floor level to the activating handle or lever of the box. Manual fire alarm boxes shall be red in color. Most fire alarm bells should be mounted at heights that place their tops above the floor at a height of at least 90 inches, or 7 1/2 feet, leaving at least 6 inches between the ceiling and the bell. Exceptions to standard fire alarm bell mounting heights must account for audibility in fire alarm systems.

____ When detectors are used, device locations, mounting heights, and building manual pull boxes, and other approved automatic detection devices or. Tir 6, AP NFPA 72 requires that manual pull stations be installed within 60 inches of the exit doorway of each exit, mounted between 42 inches and A AP MANUAL PULL STATIONS SHALL BE MOUNTED AT 48 INCHES ABOVE THE FINISHED FLOOR TO CENTER OF DEVICE. 6. WALL-MOUNTED AUDIO APPLIANCES SHALL BE.